Frequently Asked Questions

PMA stands for Pishgaman Memari Aria. PMA is the biggest producer (OEM) in Almas Kavir Yazd factory with a production capacity of 1.5 million square meters per year. PMA is also the first manufacturer of full body monocolor porcelain ceramic tiles with a wide variety of colors. PMA is the first brand to be certified by Road, Housing & Urban Development Research Center and the products of this company have test reports from reputable international laboratories such as SAM Turkey. PMA is the first company to have production and cutting services along with selling products

Yes, the entire manufacturing process takes place exclusively in Iran

PMA porcelain ceramic has a high technical performance that makes it suitable for various private and public uses; such as airports, metro stations, shopping malls and commercial areas as well as residential areas, offices, factories, etc. Due to the variety of surface types (matte, polished, semi-polished, etc.), it is recommended to choose the type of surface according to the use of the building.

It is recommended to consider at least 3 mm width joints between the ceramics when installing. for installing large size porcelain ceramic tiles (at least one dimension larger than 120 cm) it is recommended to consider more values for joint width. In addition, at intervals of at least 3.5 to 4.5 meters for outdoor uses and at intervals of at least 6 to 8 meters for indoor uses, movement joints must be installed and be filled with suitable flexible sealants

PMA porcelain ceramics are resistant to staining and stains created on ceramics are mostly could be removed by rinsing. In some special cases (such as cementitious stains created during the installation of ceramic tiles), common cement cleaners can be used.

Porcelain ceramic is a coating that passes all the requirements of the national standard of Iran ISIRI 25 and Annex G of the European standard EN 14411. Porcelain ceramics are very dense and have low porosity, which makes them have very low water absorption (less than 0.5%). The low water absorption of porcelain ceramics is the reason for the very desirable technical and chemical performance of this type of ceramic. All ceramic tiles produced by PMA are porcelain

1.Variety in colors, design and dimensions 2.Water absorption less than 0/5 % 3.High breaking strength and modulus of rupture 4.Suitable for outdoor use due to high frost resistance 5.The most suitable coating for high-traffic location due to high resistance to impact and abrasion 6.High resistance to thermal shock 7.The most suitable material for facade coating due to no color change against UV rays 8.Easy to clean and high stain resistance 9.High chemical resistance 10.High fire resistance